هواساز

هواساز

air-handling-units-min
Features
• 14 sizes of central air handling units with double paneling with panel thickness of 50 mm.
• Support structure realized in aluminium alloy sections and a large choice of panels.
• Wide range of sections and components to satisfy all plant engineering requirements.
• Double intake centrifugal fans with forward or reverse blades.
• PLUG FAN type fan with inverter regulation, able to adapt to the most varied system requirements. Main features
Structure:
• in aluminium sections with rounded edges both internally and externally allowing greater cleanliness.
• New paneling and gaskets, able to guarantee reduced seepage in compliance with the EN11886 standard.
• Reduction of noise emission thanks to the use of material with high sound-absorption power.
• Small dimensions and contained height.
Internal components:
• new high-efficiency heat exchangers with small pressure drops.

• Mixing chamber with three dampers the configurations for the mixing chambers with three dampers and are the following: _ tow upper dampers and an internal one for recirculation;
_ two front dampers and a horizontal one for recirculation ( for overlapping control units);
Large availability of filters:
• Filters with large surfaces to reduce the pressure drops and increase the duration
- cell pre-filters
- Roll filters
- Bag filters
- Absolute filters
- Activated carbon filters
- Germicidal lamp

Electric components
• Electronic regulation available able to optimize the performance and simplify installation of the control unit itself.